|
SUPPORTS FOLLOWING MODELS AT PRESENT
- T28, R310, A26x8, T20, T29,
- T39, R520, T65, T68m, T68i, T200, T300, T310,
P800,
- T610, T230, Z600, T630, P900 (all old &
NEW versions including latest versions)
- LATEST UPDATE NOW SUPPORTS Z200.
- ALSO NOW SUPPORTS USER LOCK RESET
CLIP is updatable for future versions via attached
cable and visiting www.networkunlock.com for latest
upgrades.
Procedure for unlock is as follows for all phones
except P800/P900
- Turn on the clip. Green LED is ON stable.
- Connect phone to clip (phone is powered off)
- Press the "RESET" button. Red LED
blinks ON & OFF a few times
- Green LED is ON when boot is OK.
- Unlock process start. All LEDs is OFF few seconds.
- When green LED is ON, phone is unlocked.
If green LED is OFF and red LED is ON, phone is
not unlocked in this session (phone is already
unlocked, new version or unsupported model).
- After few seconds, green LED is ON and clip
is ready for another phone.
Procedure for SE P900 & P900 is as follows.
Hold down the RESET button and power on the clip
till the GREEN LED is blinking.
Then connect the phone and UNLOCK as normal as
above.
AFTER V1.2 UPDATE
After updating with v1.2 file (all versions Z200)
Unlock procedure as follows for Z200.
1) Insert sim card
2) Connect the phone and press reset button
3) After unlock process, green led is ON
4) Wait for phone power on (or manual power on)
5) If phone is reset and unlocked, power off the
phone
6) If phone is locked, press <**< and unlock
phone with ANY code, then power off the phone
|
