Samsung Clip

User Guide :
It can repair software bugs of Samsung 100 / N188 / N620 / N628 / A200 / A288 / A300 / A388
N200 / N288 / A400 / A408 / R200 / R208 / T100 / T108 / T208 / T408 / T508 / V208 / S105 /
S300 / S308 / V205 / V200 / S500 / E700 / S508 / E708 / E710 / E715 /E80x etc phones by
restoring IMEI, Unlock phone lock and net-lock.


Introduction:
1 - Fix the battery in and power on it; it will display the “SAMSUNGUNLOCKER 4TH Generarion 1>N 2>A 3>Q,S,V 4>S500,E700”message Select“1>N”(Press “1”for N phones);“2>A”(“2”---A phones);“3>Q,S,V”(“3”---Q or sor V phones);“4>S500;E700“(“4”---S500/E700) All the outputs are available.

2 - “N”: power on the phone, connect the cable well; Select "1>N"."1>IMEI" - press "1" and input 14 digits. If it says "OK",the IMEI repaired. Input "*#06#" to check the new IMEI (remove the cable)."2>SIM" - press "2" to unlock net-lock after it says OK.And it will be back to factory setting:"00000000". "3>Phone" - "3" to unlock phone lock; and it is back factory setting too: "00000000" or "0000".Press "#" to return; press "*" to clear input digit).

3 - "A": Power off the phone and connect it well; the phone backlight will turn on, but no display. Select "2>A", and to do the same steps as "N" operation. (Remove and re -fix the battery before checking the new IMEI).

4 - "S,Q,V": On the phone and connect it. It won't show the chargingmode; select "3>Q,S,V"andpress "1", then input 14digits. When it display "Set IMEI…OK", the IMEI is ok; all the other operation, as the "N" steps too.

5 - S50X/ E70X / X60X Off the phone and connect it; Select "4>S50X?E70X?X60X.get "TO TEST MODE PLZ POWER ON". then press phone "ON" button.Otherwise the phone can't into Test Mode. Then do as the wizard guide."OK"tell you the operation is finished,please remove the battery and re-fix,everything is ok.

6 - E710 / E715 series; All the operation as the "N" senes steps too.

7 - E80X,Series; All the operotion as the "S50X,S70X,X60X" series steps too.


Notes:
1 - Battery DC9V; if the clip no work,please changse change a new one;
2 - Phone must be charege enough during the operation.
3 - If failed the first time, please try more times.
4 - If "N" phones IMEI can't be repaired, please input the same IMEI twice.
5 - "A" phone lock will be back as "00000000".
6 - V200/V208/V205is available for IME, no unlocking.