Wholesale Irda work station

Technic Parameter

Voltage - 220V-50Hz
Power Supply : 800w
Temperature : 60C to 460 C

User Manual

1 - Boot.
Check the power source,wind the plug.

Turn on the power source.Don’t use until pass check.Pand will display enactment value.When last time used.

Installation the repair shell. Fix the line on the strip rack. Screw the light system height.Keep 20-30mm between light and welder machine.

Accordingtomeasurement of welder piece.Proprictily screw temperature.from60C-460C.When you strip 15×15mm piece.Choice temperature 240-350C.When you strip 30×30mm piece.Choice temperature 250-460C.The temperature come up to 460C.The light system will shoot straightly.Please pay more attention to yourself control time.avoid burn out.

Screw focus.The light system smallest diameter is 15mm .the biggest is 30mm.Normally keep 20-30mm.

Turn on the two switches.They control warm-up plate and light system.

2 Dismantle and weld

Regulate temperature , make the chip focus

After suitable for timing, the tin is clicked and melted, take out the chip